We're ready to share our experience.
After dived into the realm of hashtag hot runner system molds, I found myself exploring the intricacies of cold runner systems. It's fascinating to witness the rapid and continuous development and inn...
EPD is a common coating technology used to deposit particulate or dispersed pigments onto conductive substrates...
Chromate conversion coating refers to a thin film formed on the surface of machined products through chromate treatment. This film is typically composed of chromium oxide or other chromium compounds,...
👩💻 1， Why are hot runners controlled by some renowned companies globally, such as hashtag#YUDO, hashtag#MOLDMASTERS, D-M-E, and hashtag#INCOE? How do they maintain such high-quality systems? 👩💻...
Pickling generally refers to an industrial process in which an acidic solution is used to remove oxides, rust, scale, and other impurities from metal surfaces for the purpose of cleaning, brightening,...
SurTec 650 is a chemical treatment agent produced by SurTec Company. It is mainly used for anti-corrosion and anti-rust treatment of metal surfaces. Specifically, SurTec 650 is a phosphorus-containing...
🤔 Recently, I conducted some research on switching gates online and discovered limited information available. Generally, A switching gate in tooling molds, also known as a hot runner switching gate,...
Hello again! As I continue my exploration of the intricacies of part design, molds, and the molding industry, I'm continually fascinated by the entire process. Today, I stumbled upon some intriguing i...
Product surface finish is not only a matter of product appearance, but also one of the key factors related to product quality, performance and customer experience. During the manufacturing process, en...
Today, I received a positive comment from Musbbir Design Space regarding my study note on sub gates in tooling mold design. I want to express my gratitude to Musbbir for the thumbs up, and I'm committ...
Recently, I delved into the intriguing world of injection mold tooling and learned about the types of gate, the sub gate or tunnel gate. Below is my study notes, I know there's still much to learn, b...
The design and manufacturing of blow molds need to take into account factors such as material selection, product shape and size requirements, production efficiency, etc. High-quality blow molds ensure...